
AI-generated image.
The short answer: "remove the preservatives" is not the deletion of one ingredient
A cosmetic product distributed in Korea has to meet the microbial limits whether or not it contains a preservative, and if it does contain one, only the preservatives listed in the MFDS notice may be used, and only within their stated limits. So "please make it without preservatives" is rarely a single line removed from an ingredient list. It is a development question: can the same level of protection be built another way?
This article sets out what to decide before you put that request in a brief, and where the line actually sits in the Korean rules. How to choose the raw materials themselves is covered separately in the ingredient selection guide.
1. The same sentence hides three different requests
In a development inquiry, "preservative-free" usually means one of the following. Write down which one you mean, or the formulation team cannot answer.
- Avoid specific ingredients. Exclude parabens or particular preservatives while allowing others. This is the most common case and the fastest to answer.
- Remove every ingredient classified as a preservative. This becomes a development project that also changes the formula type, the container and the production conditions.
- Advertise the product as preservative-free. Separately from the formulation decision, this adds a question of substantiation data (see section 5).
The three differ in lead time and in the documents required. Sent as one request, the quotation and the schedule will change twice.
2. What the Korean rules actually require
Three provisions of the MFDS notice Regulation on Safety Standards for Cosmetics (Notice No. 2026-19, in force 18 March 2026) bear directly on this topic. The notice applies to all cosmetics manufactured, imported or distributed in Korea (Article 2).
- Preservatives work as a positive list. Raw materials requiring use restrictions, and their conditions of use, are set out in Annex 2, and preservatives, UV filters and similar ingredients that are not in Annex 2 may not be used (Article 4). A preservative used in another market cannot simply be carried over; the list has to be checked first.
- Microbial limits depend on the product type. Total aerobic microbial count must be 500 CFU/g(mL) or less for baby and infant products and eye-makeup products, bacteria and fungi must each be 100 CFU/g(mL) or less for wet wipes, and other cosmetics must be 1,000 CFU/g(mL) or less, while Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus must not be detected (Article 6(4)).
- Some liquid products have a pH range. Liquids, lotions, creams and similar liquid-type products within the baby and infant, eye-makeup, colour-makeup, hair (excluding shampoo and rinse), shaving (excluding shaving cream and foam) and basic skincare (excluding makeup removers) categories must have a pH of 3.0 to 9.0. Products that contain no water and products rinsed off with water immediately after use are excluded (Article 6(6)). This matters because adjusting pH is one of the levers used in preservation design.
One more point should be stated precisely. No provision requiring a preservative-efficacy (challenge) test is found in that notice. What the notice sets is the result: a distributed product must meet the standards above. Test methods follow Annex 4, and a company's own method may be used where it is scientifically and reasonably justified (Article 6(1)). Which test to run, and under what conditions, is therefore an item the brand and the manufacturer agree on. What a release certificate of analysis contains is covered in finished-product test reports.
3. Reducing preservatives shifts the load elsewhere
Preservation is not one ingredient. It is a structure held up by the formula, the container, the filling conditions and the distribution route together. Remove part of it and the rest has to carry more. Put the following in the brief and the review can be done in one pass.
- Does it contain water? Anhydrous formats (oils, balms, powders) and water-containing formats start from different places. Once water is in, preservation is a basic condition rather than an option.
- What kind of container? An open jar that fingers reach into and an airless pump, tube or dropper have different contamination routes. Changing the container also means re-checking compatibility with the formula; container and formula compatibility sets out when to check.
- What shelf life and period-after-opening do you plan to print? A printed period needs a basis. How those numbers are decided is covered in shelf life and period after opening.
- Where does it travel and how is it stored? Sea freight to a hot market, open-shelf display and a consumer's bathroom place different loads on the same product. Tell us the destination market and the shipping method first.
- A base formula or a new one? Changing only the preservation part of an already proven formula still requires a fresh assessment. The difference between the two routes is in base formula versus new formulation.
4. What changes with each request
Scroll horizontally to see all columns when the table is wider than your screen.
| Request | Mainly affected | Check first |
|---|---|---|
| Exclude specific preservative ingredients | Preservation combination in the formula, stability re-check | Whether a usable alternative sits within the Annex 2 list and its limits |
| Exclude every ingredient classified as a preservative | Formula type, container, filling conditions, printed periods | Whether an anhydrous format or a closed container is possible, and how the microbial limits will be met |
| Print a longer period | Preservation design, stability and period evidence | Who produces and who keeps the evidence for the printed period |
| Advertise it as preservative-free | Label and advertising wording, substantiation data | Whether test data showing the ingredient is absent from the product can be obtained |
Every item in the right-hand column is answered with a responsible person and a date, not with yes or no.
5. Claiming "preservative-free" brings substantiation with it
Leaving preservatives out of a formula and advertising that fact are two different tasks. Article 14(1) of the Cosmetics Act (Act No. 22113, in force 20 October 2026) requires that a business operator or seller must be able to substantiate factual matters in its own labelling and advertising. If the Minister of Food and Drug Safety requests substantiation data, it must be submitted within 15 days of the request, and advertising that continues without submission is subject to an order to stop (Article 14(3) and (4)).
The expected level of that data is set in the MFDS notice Regulation on Substantiation of Cosmetic Labelling and Advertising (Notice No. 2026-76, amended 10 November 2026, in force 11 November 2027). Article 3(3) of that notice gives, as an example of data only partially related to the claim, a "free of ○○" advertisement supported by a manufacturing control record or raw-material test data instead of test data showing that the ingredient is not present in the product. In other words, a record that the ingredient was not added during production may not be enough on its own.
Labelling and advertising likely to deceive consumers or cause them to misunderstand are prohibited (Article 13(1) of the same Act). Note that an amendment of 26 May 2026 renumbers the items in that paragraph with effect from 27 November 2026. Which evidence each phrase calls for is covered further in advertising claims and substantiation.
6. If the product is made for export only
Permitted preservatives and their limits differ between markets, and so do local rules on "free of" wording. How Korean requirements apply to products made solely for export is set out in export-only products. Final confirmation of destination-market requirements belongs to your local responsible person or agent.
7. Bring these five lines to the first conversation
- Product type and format: whether it contains water, and whether it is rinsed off.
- The ingredients you want to avoid, and why: a channel requirement or a brand policy.
- Container candidates: open or closed, and any component already decided.
- Destination market, shipping and storage conditions, plus the shelf life and period-after-opening you intend to print.
- The wording you want to use in advertising: write the exact phrase.
With those five lines, the formula, the container, the testing and the labelling can be reviewed together. You can start at formulation development inquiry, and if only the product category is decided, send it in that state. Specific quantities, unit prices and schedules depend on the product and the conditions, and are confirmed in the conversation.
Frequently asked questions
Can a cosmetic with no preservative at all be manufactured in Korea?
No provision requiring that a preservative be included is found in the Regulation on Safety Standards for Cosmetics. A distributed product must still meet the microbial standards above, so whether the formula, the container and the production conditions can meet them has to be reviewed product by product.
Is a preservative-efficacy test mandatory?
No provision requiring one is found in the Regulation on Safety Standards for Cosmetics. Which tests to run is agreed between the brand and the manufacturer, so note the tests you need and who pays for them during the inquiry stage.
Does "paraben-free" mean the same as "preservative-free"?
No. Excluding one group of ingredients and excluding all preservation ingredients are different claims, and the substantiation expected for each in labelling and advertising differs as well.
Sources
- Regulation on Safety Standards for Cosmetics, Articles 2, 4 and 6 and Attached Table 2, MFDS Notice No. 2026-19, in force 2026-03-18 (Korea Law Information Center) (accessed 2026-11-20) ↗
- Cosmetics Act of Korea, Articles 13 and 14, Act No. 22113, in force 2026-10-20, with item renumbering of Article 13(1) in force 2026-11-27 (Korea Law Information Center) (accessed 2026-11-20) ↗
- Regulation on Substantiation of Cosmetic Labelling and Advertising, Article 3(3), MFDS Notice No. 2026-76, amended 2026-11-10, in force 2027-11-11 (Korea Law Information Center) (accessed 2026-11-20) ↗